XIT will be switched on as soon as you check TX updates. You cannot use SAT mode as this is only used for cross-band operation, so you use Split mode. Same Band (Split) An example is talking to the astronauts on the ISS where the TX frequency is 145.200.000 MHz and the RX frequency is 145.800.00 MHz. So if the frequencies in Ham Radio Deluxe are the opposite of those shown on the radio just press TF SET once.
Be careful with the TS-2000's TF SET button, each time you press TF-SET the uplink (TX) frequency and the downlink (RX) frequency are swapped.
The TS-2000 must be in satellite mode so that the computer can update the TX frequency. When selected the Sub VFO is used for transmitting, Doppler correction is applied by adjusting the XIT value.Ĭross Band In normal cross-band satellite mode (for example transmit on 70cms and receive on 2m) select: When you start the TS-2000 you have an extra TX VFO option Sub+XIT which is only used for same band split operation (see below). The computer can only update both main and sub frequencies either:Ī special solution is required when the uplink (TX) and downlink (RX) frequencies are in the same band. Solution home Ham Radio Deluxe User Guides Satellite Tracking Information on Specific Radios
0 kommentar(er)
